Six Must-Have DIY Tools for Home Maintenance

So, do you want to start with home maintenance to save money, or are you tired of taking a break from work and getting ready for the craftsmen who don’t finish in time? Anyone can do a basic DIY job, and whether you want to move on to a more complicated DIY job depends on how brave you are, how much patience you have, and whether you are likely to learn to try some disaster on the road. Aside from saws, ladder, paint-brush, and locking-pliers, there are other essential tools you must have. You can learn about how to use these tools more effectively on the Diet of Life website.

Hammers

This guide describes the most common tools needed for essential home maintenance, so you will understand what you may ask when you pass a store. Of course, you do not need to buy all the tools at once. A tool kit is assembled for life, and tools can be purchased as needed.

Hammers

There are three types of hammer suitable as your DIY tool for home maintenance. They are a claw hammer, a standard hammer, and a lump hammer. In this article, I suggest you choose the standard hammer as it’s more suitable for home maintenance and easier to handle. A standard hammer weighs only 1 pound, but you will probably buy lighter hammers to use with smaller claws, such as a bolt hammer.

Flat Screwdrivers

There are various sizes of Philips and flat head screwdrivers, mostly large and small. Screwdriver sets sometimes contain a punch to make holes before tightening screws or drilling. This looks like a screwdriver but has a sharp point pressed into the wood or plastic and turned to make a hole.

Pliers

Standard pliers are suitable for holding, pulling, bending, and twisting. They can also be used to loosen small nuts. A long pair of (cutting) pliers is the most suitable for reaching areas not accessible to ordinary jaw pliers. They are also used to bend cable ends and fix parts and are a normal tool for electrical/electronic work.

Wrenches

wrenchesThe latter is on one side and a ring at the opposite end. Keys or key combinations can also be used for situations where a nut needs to be turned, but the bolt’s threaded part extends well beyond the nut to fit a bushing.

For domestic purposes, pins or keys should not be larger than 3/4 inch. AF (around planes) or about 22 millimeters. However, if you do not purchase an expensive version, there may be some drama in the jaws after tightening, which could correct hexagonal profile angles if used frequently. However, they are useful for handling large nuts and bolts when a predetermined size crusher can be expensive.

Cordless Drill

A cordless drill is an essential tool in case you need to tighten many screws. You can use a combination drill to drill and insert the screws. Most 18 volt drills can be used to drill holes in concrete when you need sockets to fix the material to the walls, but an SDS drill with a convenient cable to make large holes is much faster and more powerful.

Utility Knife With Disposable Blades

These titles of this producer. The most common type has a retractable blade, but foldable variants can be provided to safely store the blade in a slot dug in the handle. When not using the knife, keep the blade retracted in the case to prevent accidental cuts.

Share